no interfactive in IDE debugging terminal on update
Posted: Sat Jul 25, 2015 2:44 pm
Hi
I upgraded my Codelite from 7 to 8.0 , and now the usual inside-the IDE debug terminal does not appear when debugging- a terminal window is up with the program running, stdio etc all OK. Debugging works fine, I'd just like to get the debug session back inside the Codelite IDE.
host is Debian Wheezy 32 bit.
uname -a
Linux debkal 3.2.0-4-686-pae #1 SMP Debian 3.2.51-1 i686 GNU/Linux
Any ideas? . The usual "warning: GDB: Failed to set controlling terminal : Operation not permitted" etc etc appears at the top of the terminal.
with thanks
glen
here is the debugger dump
I upgraded my Codelite from 7 to 8.0 , and now the usual inside-the IDE debug terminal does not appear when debugging- a terminal window is up with the program running, stdio etc all OK. Debugging works fine, I'd just like to get the debug session back inside the Codelite IDE.
host is Debian Wheezy 32 bit.
uname -a
Linux debkal 3.2.0-4-686-pae #1 SMP Debian 3.2.51-1 i686 GNU/Linux
Any ideas? . The usual "warning: GDB: Failed to set controlling terminal : Operation not permitted" etc etc appears at the top of the terminal.
with thanks
glen
here is the debugger dump
Code: Select all
Using gdbinit file: /tmp/codelite_gdbinit.txt
Current working dir: /home/glenenglish/Projects/FB/FBV2/enc15a
Launching gdb from : ./Debug
Starting debugger : gdb --command="/tmp/codelite_gdbinit.txt" --tty=/dev/pts/3 --interpreter=mi "./enc15a"
DEBUG>>set unwindonsignal on
DEBUG>>set breakpoint pending on
DEBUG>>set width 0
DEBUG>>set height 0
DEBUG>>set print elements 200
DEBUG>>python
DEBUG>>import sys
DEBUG>>sys.path.insert(0, '/home/glenenglish/.codelite/gdb_printers')
DEBUG>>from libstdcxx.v6.printers import register_libstdcxx_printers
DEBUG>>register_libstdcxx_printers (None)
DEBUG>>from qt4 import register_qt4_printers
DEBUG>>register_qt4_printers (None)
DEBUG>>from wx import register_wx_printers
DEBUG>>register_wx_printers (None)
DEBUG>>end
Debug session started successfully!
DEBUG>>00000001-exec-arguments
DEBUG>>00000002-exec-run
DEBUG>>=thread-group-added,id="i1"
=thread-group-added,id="i1"
DEBUG>>~"GNU gdb (GDB) 7.4.1-debian\n"
GNU gdb (GDB) 7.4.1-debian
DEBUG>>~"Copyright (C) 2012 Free Software Foundation, Inc.\n"
Copyright (C) 2012 Free Software Foundation, Inc.
DEBUG>>~"License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law. Type \"show copying\"\nand \"show warranty\" for details.\n"
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\nThis is free software: you are free to change and redistribute it.\nThere is NO WARRANTY, to the extent permitted by law. Type "show copying"\nand "show warranty" for details.
DEBUG>>~"This GDB was configured as \"i486-linux-gnu\".\nFor bug reporting instructions, please see:\n"
This GDB was configured as "i486-linux-gnu".\nFor bug reporting instructions, please see:
DEBUG>>~"<http://www.gnu.org/software/gdb/bugs/>...\n"
<http://www.gnu.org/software/gdb/bugs/>...
DEBUG>>~"Reading symbols from /home/glenenglish/Projects/FB/FBV2/enc15a/Debug/enc15a..."
Reading symbols from /home/glenenglish/Projects/FB/FBV2/enc15a/Debug/enc15a...
DEBUG>>~"done.\n"
done.
DEBUG>>&"set unwindonsignal on\n"
DEBUG>>^done
DEBUG>>&"set breakpoint pending on\n"
DEBUG>>^done
DEBUG>>&"set width 0\n"
DEBUG>>^done
DEBUG>>&"set height 0\n"
DEBUG>>^done
DEBUG>>&"set print elements 200\n"
DEBUG>>^done
DEBUG>>&"python\n"
DEBUG>>&"Traceback (most recent call last):\n"
DEBUG>>&" File \"<string>\", line 4, in <module>\n"
DEBUG>>&" File \"/home/glenenglish/.codelite/gdb_printers/libstdcxx/v6/printers.py\", line 951, in register_libstdcxx_printers\n"
DEBUG>>&" gdb.printing.register_pretty_printer(obj, libstdcxx_printer)\n"
DEBUG>>&" File \"/usr/share/gdb/python/gdb/printing.py\", line 141, in register_pretty_printer\n"
DEBUG>>&" printer.name)\n"
DEBUG>>&"RuntimeError: pretty-printer already registered: libstdc++-v6\n"
DEBUG>>&"Error while executing Python code.\n"
DEBUG>>^error,msg="Error while executing Python code."
^error,msg="Error while executing Python code."
DEBUG>>00000001^done
>> Debuggee process ID: 9430
DEBUG>>=thread-group-started,id="i1",pid="9430"
=thread-group-started,id="i1",pid="9430"
DEBUG>>=thread-created,id="1",group-id="i1"
=thread-created,id="1",group-id="i1"
DEBUG>>00000002^running
Continuing...
DEBUG>>*running,thread-id="all"
*running,thread-id="all"
DEBUG>>=library-loaded,id="/lib/ld-linux.so.2",target-name="/lib/ld-linux.so.2",host-name="/lib/ld-linux.so.2",symbols-loaded="0",thread-group="i1"
=library-loaded,id="/lib/ld-linux.so.2",target-name="/lib/ld-linux.so.2",host-name="/lib/ld-linux.so.2",symbols-loaded="0",thread-group="i1"
DEBUG>>=library-loaded,id="linux-gate.so.1",target-name="linux-gate.so.1",host-name="linux-gate.so.1",symbols-loaded="0",thread-group="i1"
=library-loaded,id="linux-gate.so.1",target-name="linux-gate.so.1",host-name="linux-gate.so.1",symbols-loaded="0",thread-group="i1"
DEBUG>>&"warning: Could not load shared library symbols for linux-gate.so.1.\nDo you need \"set solib-search-path\" or \"set sysroot\"?"
DEBUG>>&"\n"
DEBUG>>=library-loaded,id="/lib/i386-linux-gnu/i686/cmov/libc.so.6",target-name="/lib/i386-linux-gnu/i686/cmov/libc.so.6",host-name="/lib/i386-linux-gnu/i686/cmov/libc.so.6",symbols-loaded="0",thread-group="i1"
=library-loaded,id="/lib/i386-linux-gnu/i686/cmov/libc.so.6",target-name="/lib/i386-linux-gnu/i686/cmov/libc.so.6",host-name="/lib/i386-linux-gnu/i686/cmov/libc.so.6",symbols-loaded="0",thread-group="i1"
DEBUG>>=thread-exited,id="1",group-id="i1"
=thread-exited,id="1",group-id="i1"
DEBUG>>=thread-group-exited,id="i1",exit-code="0"
=thread-group-exited,id="i1",exit-code="0"
DEBUG>>*stopped,reason="exited-normally"
Program exited normally.