CodeLite IDE

Hello, everyone,
I meed a strange question, while i run CodeLite from root user, i can debug my program(such as breakpoint), but run Codelite from generic user, debug is not available. the error information are:
This GDB was configured as "i386-redhat-linux-gnu"...
Using host libthread_db library "/lib/libthread_db.so.1".
set unwindonsignal on
set width 0
set height 0
Continuing...
/dev/?: No such file or directory.
You can't do that without a process to debug.


My CodeLite is build from VNC source code using root user.
Any help is useful. Thanks.

Hi,

To help me track down this bug,

Go to: Settings -> Debugger Settings... -> Loaded Debuggers
and enable the 'Enable full debugger loading'

Try to debug again and paste here the log

Eran

eranif wrote:Hi,

To help me track down this bug,

Go to: Settings -> Debugger Settings... -> Loaded Debuggers
and enable the 'Enable full debugger loading'

Try to debug again and paste here the log

Eran

Thanks. The same result is occured.

whole log:
Debug session started successfully!
DEBUG>>~"GNU gdb Red Hat Linux (6.6-35.fc8rh)\n"
GNU gdb Red Hat Linux (6.6-35.fc8rh)
DEBUG>>~"Copyright (C) 2006 Free Software Foundation, Inc.\n"
Copyright (C) 2006 Free Software Foundation, Inc.
DEBUG>>~"GDB is free software, covered by the GNU General Public License, and you are\n"
GDB is free software, covered by the GNU General Public License, and you are
DEBUG>>~"welcome to change it and/or distribute copies of it under certain conditions.\n"
welcome to change it and/or distribute copies of it under certain conditions.
DEBUG>>~"Type \"show copying\" to see the conditions.\n"
Type "show copying" to see the conditions.
DEBUG>>~"There is absolutely no warranty for GDB. Type \"show warranty\" for details.\n"
There is absolutely no warranty for GDB. Type "show warranty" for details.
DEBUG>>~"This GDB was configured as \"i386-redhat-linux-gnu\"...\n"
This GDB was configured as "i386-redhat-linux-gnu"...
DEBUG>>~"Using host libthread_db library \"/lib/libthread_db.so.1\".\n"
Using host libthread_db library "/lib/libthread_db.so.1".
DEBUG>>(gdb)
DEBUG>>&"set unwindonsignal on\n"
set unwindonsignal on
DEBUG>>^done
DEBUG>>(gdb)
DEBUG>>&"set breakpoint pending on\n"
set breakpoint pending on
DEBUG>>^done
DEBUG>>(gdb)
DEBUG>>&"set width 0\n"
set width 0
DEBUG>>^done
DEBUG>>(gdb)
DEBUG>>&"set height 0\n"
set height 0
DEBUG>>^done
DEBUG>>(gdb)
DEBUG>>&"break /home/everchen/Projects/HelloWorld/hello.c:23\n"
break /home/everchen/Projects/HelloWorld/hello.c:23
DEBUG>>~"Breakpoint 1 at 0x80488b1: file hello.c, line 23.\n"
Breakpoint 1 at 0x80488b1: file hello.c, line 23.
DEBUG>>00000001^done
Successfully set breakpoint at: /home/everchen/Projects/HelloWorld/hello.c:23
DEBUG>>(gdb)
DEBUG>>00000002^done,bkpt={number="2",type="breakpoint",disp="keep",enabled="y",addr="0x080488b1",func="main",file="hello.c",fullname="/home/everchen/Projects/HelloWorld/hello.c",line="23",times="0"}
DEBUG>>(gdb)
DEBUG>>00000003^running
Continuing...
DEBUG>>(gdb)
DEBUG>>&"/dev/?: No such file or directory.\n"
/dev/?: No such file or directory.
DEBUG>>&"You can't do that without a process to debug.\n"
You can't do that without a process to debug.
DEBUG>>00000003^error,msg="You can't do that without a process to debug."
You can't do that without a process to debug.
DEBUG>>(gdb)

I found a strange problem aim at it.
I run CodeLite from console term, this debug is OK.
If run from QuickBar from GNOME, it is failed.

cy007 wrote:I found a strange problem aim at it.
I run CodeLite from console term, this debug is OK.
If run from QuickBar from GNOME, it is failed

Then it must be something environmental. I am not familiar with QuickBar, maybe it fails to run ~/.bashrc?

Eran